The ideal anchor for fast push-through fixture into concrete where excellent holding power is required.
  • Supplied complete unit and ready to use.
  • Anchor size is the same as the hole size eliminates drilling oversize hole.
  • Use predrilled fixture as a template and fixture can be anchored without moving back and forth.
  • One piece round expansion sleeve provides true 360 degree hole cantact for greater holding power strength and the large expansion sleeve area reduces concrete unit stress.
  • Does not require exact hole depth.
  • Saves time and increases working efficiency.
  • Spring washer prevents the nut from loosing after installed, vibration proof.
  • Made fro steel and finished with rust resistant gold zinc plate.

Installation

1. Using the fixture being fastened as a template, drill hole in concrete same diameter as the Fastenic Wedge Anchor to the recommended depth.
2. Clean the hole
3. Drive the Fastenic Wedge Anchor into the hole through fixture until washer and nut are flush with fixture.Ø  

4. Tightn nut with wrench, approximately 3 to 4 full turns of the nut. The taper stud move upward to expand the expansion sleeve to grip the hole firmly.