HANGER ANCHORS : Complete quick and easy to install for hanging
Complete unit ready to use.
Drilled hole is the same diameter as anchor diameter.
There are 3 types for suitable fixings.
Made from steel and finished with rust resistant gold passivated zinc plated.
Installation
1. Drill hole of recommended diameter and depth into masonry.
2. Clean the hole. Insert Fastenic Hanger Bolt until washer flush with the surface.
3. Tighten nut with wrench, approximately 2 to3 full turns of the nut. The anchor is properly set.
4. Use wire to rope with the anchor plate.
