High safe working loads capacity without expansion stresses.
  • Anchorage by strong mechanical bonding of chemical resin to both anchor stud and sides of drilled hole.
  • The anchoring capacity is up to 75kN in compression area.
  • No expansion stresses in base material.
  • Close anchors spacing and edge distance.
  • Sealed drilled hole.
  • Vibration resistance.
  • Provides safe and secure anchorings in difficult application.

Installation

1. Drill hole of recommended diameter and depth.
2. Clean the hole. Insert Fastenic Chemical capsule in to the hole.
3.Driver the Anchor Stud and vibrate into the capsule until the setting depth mark reaches the surface.   4. Switch off powertool immediately ad pull off the Anchor Stud. Allow full curing time before loading or tightening.
     
   

5. Place fixture. Tighten nut to recommended torque.

   
     
Material Specification :    

Chemical Capsule : Synthetic, resin, quartz sand and hardener